home *** CD-ROM | disk | FTP | other *** search
/ Enter 2004 January / enter-2004-01.iso / files / maxima-5.9.0.exe / {app} / share / maxima / 5.9.0 / doc / INSTALL < prev    next >
Encoding:
Text File  |  2003-02-09  |  8.0 KB  |  197 lines

  1. Maxima is written in Common Lisp. For details about supported Common
  2. Lisp implementations, please see the file README.lisps.
  3.  
  4. Maxima utilizes the GNU Autotools for building. To build with the
  5. default options, type
  6.     ./configure
  7.     make
  8.     make install
  9. configure supports many options. Type
  10.     ./configure --help
  11. to see them enumerated.
  12.  
  13. Generic Autotools build instructions follow.
  14.  
  15. Basic Installation
  16. ==================
  17.  
  18.    These are generic installation instructions.
  19.  
  20.    The `configure' shell script attempts to guess correct values for
  21. various system-dependent variables used during compilation.  It uses
  22. those values to create a `Makefile' in each directory of the package.
  23. It may also create one or more `.h' files containing system-dependent
  24. definitions.  Finally, it creates a shell script `config.status' that
  25. you can run in the future to recreate the current configuration, a file
  26. `config.cache' that saves the results of its tests to speed up
  27. reconfiguring, and a file `config.log' containing compiler output
  28. (useful mainly for debugging `configure').
  29.  
  30.    If you need to do unusual things to compile the package, please try
  31. to figure out how `configure' could check whether to do them, and mail
  32. diffs or instructions to the address given in the `README' so they can
  33. be considered for the next release.  If at some point `config.cache'
  34. contains results you don't want to keep, you may remove or edit it.
  35.  
  36.    The file `configure.in' is used to create `configure' by a program
  37. called `autoconf'.  You only need `configure.in' if you want to change
  38. it or regenerate `configure' using a newer version of `autoconf'.
  39.  
  40. The simplest way to compile this package is:
  41.  
  42.   1. `cd' to the directory containing the package's source code and type
  43.      `./configure' to configure the package for your system.  If you're
  44.      using `csh' on an old version of System V, you might need to type
  45.      `sh ./configure' instead to prevent `csh' from trying to execute
  46.      `configure' itself.
  47.  
  48.      Running `configure' takes awhile.  While running, it prints some
  49.      messages telling which features it is checking for.
  50.  
  51.   2. Type `make' to compile the package.
  52.  
  53.   3. Optionally, type `make check' to run any self-tests that come with
  54.      the package.
  55.  
  56.   4. Type `make install' to install the programs and any data files and
  57.      documentation.
  58.  
  59.   5. You can remove the program binaries and object files from the
  60.      source code directory by typing `make clean'.  To also remove the
  61.      files that `configure' created (so you can compile the package for
  62.      a different kind of computer), type `make distclean'.  There is
  63.      also a `make maintainer-clean' target, but that is intended mainly
  64.      for the package's developers.  If you use it, you may have to get
  65.      all sorts of other programs in order to regenerate files that came
  66.      with the distribution.
  67.  
  68. Compilers and Options
  69. =====================
  70.  
  71.    Some systems require unusual options for compilation or linking that
  72. the `configure' script does not know about.  You can give `configure'
  73. initial values for variables by setting them in the environment.  Using
  74. a Bourne-compatible shell, you can do that on the command line like
  75. this:
  76.      CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
  77.  
  78. Or on systems that have the `env' program, you can do it like this:
  79.      env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
  80.  
  81. Compiling For Multiple Architectures
  82. ====================================
  83.  
  84.    You can compile the package for more than one kind of computer at the
  85. same time, by placing the object files for each architecture in their
  86. own directory.  To do this, you must use a version of `make' that
  87. supports the `VPATH' variable, such as GNU `make'.  `cd' to the
  88. directory where you want the object files and executables to go and run
  89. the `configure' script.  `configure' automatically checks for the
  90. source code in the directory that `configure' is in and in `..'.
  91.  
  92.    If you have to use a `make' that does not supports the `VPATH'
  93. variable, you have to compile the package for one architecture at a time
  94. in the source code directory.  After you have installed the package for
  95. one architecture, use `make distclean' before reconfiguring for another
  96. architecture.
  97.  
  98. Installation Names
  99. ==================
  100.  
  101.    By default, `make install' will install the package's files in
  102. `/usr/local/bin', `/usr/local/man', etc.  You can specify an
  103. installation prefix other than `/usr/local' by giving `configure' the
  104. option `--prefix=PATH'.
  105.  
  106.    You can specify separate installation prefixes for
  107. architecture-specific files and architecture-independent files.  If you
  108. give `configure' the option `--exec-prefix=PATH', the package will use
  109. PATH as the prefix for installing programs and libraries.
  110. Documentation and other data files will still use the regular prefix.
  111.  
  112.    In addition, if you use an unusual directory layout you can give
  113. options like `--bindir=PATH' to specify different values for particular
  114. kinds of files.  Run `configure --help' for a list of the directories
  115. you can set and what kinds of files go in them.
  116.  
  117.    If the package supports it, you can cause programs to be installed
  118. with an extra prefix or suffix on their names by giving `configure' the
  119. option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
  120.  
  121. Optional Features
  122. =================
  123.  
  124.    Some packages pay attention to `--enable-FEATURE' options to
  125. `configure', where FEATURE indicates an optional part of the package.
  126. They may also pay attention to `--with-PACKAGE' options, where PACKAGE
  127. is something like `gnu-as' or `x' (for the X Window System).  The
  128. `README' should mention any `--enable-' and `--with-' options that the
  129. package recognizes.
  130.  
  131.    For packages that use the X Window System, `configure' can usually
  132. find the X include and library files automatically, but if it doesn't,
  133. you can use the `configure' options `--x-includes=DIR' and
  134. `--x-libraries=DIR' to specify their locations.
  135.  
  136. Specifying the System Type
  137. ==========================
  138.  
  139.    There may be some features `configure' can not figure out
  140. automatically, but needs to determine by the type of host the package
  141. will run on.  Usually `configure' can figure that out, but if it prints
  142. a message saying it can not guess the host type, give it the
  143. `--host=TYPE' option.  TYPE can either be a short name for the system
  144. type, such as `sun4', or a canonical name with three fields:
  145.      CPU-COMPANY-SYSTEM
  146.  
  147. See the file `config.sub' for the possible values of each field.  If
  148. `config.sub' isn't included in this package, then this package doesn't
  149. need to know the host type.
  150.  
  151.    If you are building compiler tools for cross-compiling, you can also
  152. use the `--target=TYPE' option to select the type of system they will
  153. produce code for and the `--build=TYPE' option to select the type of
  154. system on which you are compiling the package.
  155.  
  156. Sharing Defaults
  157. ================
  158.  
  159.    If you want to set default values for `configure' scripts to share,
  160. you can create a site shell script called `config.site' that gives
  161. default values for variables like `CC', `cache_file', and `prefix'.
  162. `configure' looks for `PREFIX/share/config.site' if it exists, then
  163. `PREFIX/etc/config.site' if it exists.  Or, you can set the
  164. `CONFIG_SITE' environment variable to the location of the site script.
  165. A warning: not all `configure' scripts look for a site script.
  166.  
  167. Operation Controls
  168. ==================
  169.  
  170.    `configure' recognizes the following options to control how it
  171. operates.
  172.  
  173. `--cache-file=FILE'
  174.      Use and save the results of the tests in FILE instead of
  175.      `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
  176.      debugging `configure'.
  177.  
  178. `--help'
  179.      Print a summary of the options to `configure', and exit.
  180.  
  181. `--quiet'
  182. `--silent'
  183. `-q'
  184.      Do not print messages saying which checks are being made.  To
  185.      suppress all normal output, redirect it to `/dev/null' (any error
  186.      messages will still be shown).
  187.  
  188. `--srcdir=DIR'
  189.      Look for the package's source code in directory DIR.  Usually
  190.      `configure' can determine that directory automatically.
  191.  
  192. `--version'
  193.      Print the version of Autoconf used to generate the `configure'
  194.      script, and exit.
  195.  
  196. `configure' also accepts some other, not widely useful, options.
  197.